Performance of adhesive fiberglass tape

Product Feature:

Adhesive backed fiberglass tape is fabricated from high quality texturized fiberglass yarns that will not burn and will withstand continuous exposure to temperatures of 1000°F / 520℃. It resists most acids and alkalis and is unaffected by most bleaches and solvents. Available as a Plain tape or Drop-Warp tape (center longitudinal yarns missing), often called a Bolt-hole tape or Ladder tape.

Specification:

Thickness: 0.8mm up to 5mm

Width: 20mm up to 300mm

Weight: 680gsm up to 2000gsm

Weaving structure: plain for thickness 0.8mm up to 5mm, twill for thickness 1.5mm up to 5mm

Roll length: max 50m

We also  make below treatments for some special applications：

Aluminum foil faced on one side

Vermiculite coated

Heat treated (caramelized)

Graphite coated

Silicone coated

Backed with self- ashesive tape

Application:

Provide protection of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection. Also used as a gasket or seal.

(source:http://www.gwh-firesleeve.com/performance-of-adhesive-fiberglass-tape/